The JUSTFOG Q16 Pro Starter Kit is a pro version of JUSTFOG Q16 Kit. With 900mAh inbuilt battery, the JUSTFOG Q16 Pro provides an all-day-long vape to starters. The easy top refill ensure an anti-leak vape too. The JUSTFOG Q16 Pro has a 4-level voltage adjustment from 3.5V to 4.4V, meeting your different vaping needs. The constant voltage output of JUSTFOG Q16 Pro brings a stable performance to the users.
Please note the glass tube CANNOT be replaced.
Q16 Pro Clearomizer
Diameter: 16 x 60 mm
Tank capacity: 1.9ml
Resistance: OCC Bottom 1.6ohm
Thread: 510
Q16 Pro battery
Size: 16 x 25.5 x 70.4mm
Capacity: Built-in 900mAh
Voltage Range: 3.5-3.8-4.1-4.4V
Charging: Micro 5-pin USB, DC 5V
Thread: 510 thread
Anti-leak to refill design
4-level voltage adjustment
Bottom airflow control
Battery LED indicator
OCC bottom coil included
It comes with
| JustFog Colours | Blue, Pink, Silver, Black |
|---|
Only logged in customers who have purchased this product may leave a review.
The Smok V8 Baby Q2 replacement coils have been designed for use with the Smok TFV8 Baby tank and Baby Beast tank. Producing larger amounts of vapour, these coils should be paired with a high VG e-liquid that is 60% VG or higher.
Features:
The V8 Baby Q2 features a dual coil build, which will deliver clear flavour and large clouds. The 0.4 Ohm resistance means the V8 Baby Q2 Smok coil is best used between 55 and 65 Watts. Thanks to it’s higher resistance, the Q2 is suited to a much wider range of mods than the lower resistance coils in the rest of the Baby Beast Family.
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit./p>
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
This version of the Innokin Prism Coil has been designed to fit the Endura T22 and Endura T18 vape tanks only. There is another model available to fit the T22E and T18E Tanks. Registering at 1.5 Ohm resistance the Prism Coil is designed for mouth to lung vaping, making it a good option for new users or advanced users looking for a discreet vape.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
Contains:
KangerTech VOCC-T Replacement Coil – 5 Pack The KangerTech VOCC-T replacement coils are the updated versions of the popular line of BDC coils. These coils feature organic cotton instead of the original fibre wicks. The VOCC-T coils are compatible with all of KangerTech’s BDC compatible tanks, including the AeroTank, Protank and GeniTank ranges, as well as the Top Evod kit. The SSOCC coils are backwards compatible and will work in any tank that currently takes the OCC coils available in 1.5 and 1.8 ohm resistance.To achieve the best vapour clouds and taste of your favourite e liquid we suggest that coils should be replaced every 1 to 3 weeks, depending on the frequency of usage.
Kanger VOCC-T Replacement Coil Features:
Compatibility:
Vaporesso EUC Ceramic Coils are for use with the Veco Vape Tank and Estoc Vape Tank. EUC Ceramic Coils are available in 0.5 Ohm and 0.6 Ohm. With ceramic wicks rather than the traditional cotton, they are similar in design to the Vaporesso CCELL Coils.
Features:
These coils are smaller than others, this is through design and they help reduce waste – while still conducting heat and absorbing eliquid efficiently, the ceramic wick also increases the lifespan of your coils. For best results, tthese coils should be paired with high VG e-liquids that are 60% VG or higher.
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
Please be aware that from time to time we may need to send out alternative branded liquids if stocks are low BUT they will always be the same great liquid that you expect, just in an alternative branded packaging
Reviews
There are no reviews yet.