The Vaporesso GT Core replacement coils have been designed for use with the Vaporesso Revenger Mini Kit, Revenger X Kit, NRG Mini Tank and NRG SE Tank. There are eight versions of the GT replacement coils, all designed for sub ohm vaping.
Features:
The standard coils use Kanthal wire and organic cotton, working at a range of wattages to suit your vaping style. The CCELL coils use ceramic materials which reduce spit back and the chance of dry hits. The mesh coils have a larger surface area which in turn increases the amount of eliquid is heated, for a boost in flavour.
As these coils are recommended for sub ohm vaping, they are most compatible with high VG eliquids, that are 60% VG and higher.
Coil Specification:
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
| Coil Ohm | 0.4Ω GT2 Coils, 0.15Ω GT4 CLP Coils, 0.15Ω GT4 Mesh Coil, 0.2Ω GT6 Coils, 0.15Ω GT8 Coils, 0.5Ω GTCcell Coils, 0.3Ω GTCcell2 Coils, 0.18Ω GT Mesh Coils |
|---|
Only logged in customers who have purchased this product may leave a review.
These large coils come with a single coil hole inside and and 12 air holes, giving it great airflow. The slightly higher resistance of these coils compared to some other Prince coils means these are great for flavour but still offer good clouds of vapour.
This version of the Innokin Prism Coil has been designed to fit the Endura T22 and Endura T18 vape tanks only. There is another model available to fit the T22E and T18E Tanks. Registering at 1.5 Ohm resistance the Prism Coil is designed for mouth to lung vaping, making it a good option for new users or advanced users looking for a discreet vape.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
Contains:
Presenting our newest member to the Nautilus family of coils. The 0.4 Nautilus BVC Coils are our lowest ohm coils ever produced for the Nautilus range of tanks.
Launched alongside the all new Nautilus 2S Tank and Zelos V2 Kit the new 0.4ohm coils deliver intense flavour for a MTL Hybrid style vape.
Sold £3 for each and rated wattage of between 23 – 28 watts.
These coils are fully backward compatible with the Nautilus 2, Mini Nautilus and K3 Tanks, however the lower rating of the coil is much better suited to the Nautilus 2S with its better airflow and heat resistant technology.
Please Note these coils are not compatible with the Nautilus AIO device.
The Aspire Athos Coils are for use with Aspire’s Athos tank; also part of the Speeder Kit. The A3 features a triple coil design, and is rated at 0.3Ω, for use between 50 – 70W. The A5 is rated at a lower 0.16Ω, and Aspire recommend a wattage range of between 100 – 120W for this coil. The Athos coils are sold individually, in single packs.
Contains:
1 x Aspire Athos Replacement Coil
Features:
Kanthal
Suittains:able for high wattages
Important information about Sub Ohm Vaping:
These coils are designed for sub-ohm vaping. They require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. The coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.
Please be aware that from time to time we may need to send out alternative branded liquids if stocks are low BUT they will always be the same great liquid that you expect, just in an alternative branded packaging
Reviews
There are no reviews yet.