Vaporesso EUC Ceramic Coils are for use with the Veco Vape Tank and Estoc Vape Tank. EUC Ceramic Coils are available in 0.5 Ohm and 0.6 Ohm. With ceramic wicks rather than the traditional cotton, they are similar in design to the Vaporesso CCELL Coils.
Features:
These coils are smaller than others, this is through design and they help reduce waste – while still conducting heat and absorbing eliquid efficiently, the ceramic wick also increases the lifespan of your coils. For best results, tthese coils should be paired with high VG e-liquids that are 60% VG or higher.
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
£3.00
| Coil ohm | 0.3 ohm, 0.5 ohm, 0.6 ohm |
|---|
Only logged in customers who have purchased this product may leave a review.
These large coils come with a single coil hole inside and and 12 air holes, giving it great airflow. The slightly higher resistance of these coils compared to some other Prince coils means these are great for flavour but still offer good clouds of vapour.
This version of the Innokin Prism Coil has been designed to fit the Endura T22 and Endura T18 vape tanks only. There is another model available to fit the T22E and T18E Tanks. Registering at 1.5 Ohm resistance the Prism Coil is designed for mouth to lung vaping, making it a good option for new users or advanced users looking for a discreet vape.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
Contains:
KangerTech VOCC-T Replacement Coil – 5 Pack The KangerTech VOCC-T replacement coils are the updated versions of the popular line of BDC coils. These coils feature organic cotton instead of the original fibre wicks. The VOCC-T coils are compatible with all of KangerTech’s BDC compatible tanks, including the AeroTank, Protank and GeniTank ranges, as well as the Top Evod kit. The SSOCC coils are backwards compatible and will work in any tank that currently takes the OCC coils available in 1.5 and 1.8 ohm resistance.To achieve the best vapour clouds and taste of your favourite e liquid we suggest that coils should be replaced every 1 to 3 weeks, depending on the frequency of usage.
Kanger VOCC-T Replacement Coil Features:
Compatibility:
The Aspire Athos Coils are for use with Aspire’s Athos tank; also part of the Speeder Kit. The A3 features a triple coil design, and is rated at 0.3Ω, for use between 50 – 70W. The A5 is rated at a lower 0.16Ω, and Aspire recommend a wattage range of between 100 – 120W for this coil. The Athos coils are sold individually, in single packs.
Contains:
1 x Aspire Athos Replacement Coil
Features:
Kanthal
Suittains:able for high wattages
Important information about Sub Ohm Vaping:
These coils are designed for sub-ohm vaping. They require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. The coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.
Please be aware that from time to time we may need to send out alternative branded liquids if stocks are low BUT they will always be the same great liquid that you expect, just in an alternative branded packaging
Reviews
There are no reviews yet.