Get more ‘oomph’ from your mid-power battery or mod by investing in this TPD compliant, SMOK Spirals Tank. On a mod with a 20 to 40 Watt setting range, this stubby, top-fill atomizer is designed to squeeze the maximum amount of flavour from any e juice. With 4 small holes in the adjustable airflow ring, the Spirals tank has a tighter, tastier draw.
The innovative, stove-shaped coils are cleverly engineered to funnel more flavour to the standard, 510 drip-tip. The Spiral’s 2ml e liquid capacity makes this a safer tank in a family home.
If SMOK’s recent focus on high-wattage atomizers has left you feeling neglected, the SMOK Spirals Tank switches the focus back to regular vapers like you and me. With a diameter of 22mm, the Spirals atomizer is specially designed for smaller sub-ohm box mods and batteries. Already acclaimed as a premium flavour-chasing tank – the SMOK research and development team have really hit the mark with this amazingly affordable atomizer.
The chimney and coils feature some incredible innovations. The draw is pretty tight, with the funnel shaped section of the chimney concentrating vapour density. This amplifies e liquid flavour. The Spiral tank coils are drilled with 4 pairs of wicking ports. The lower ports ensure effective wicking – right down to your last few drops of e liquid. All without dry-hits or leaks!
Along with two replaceable coils, the SMOK Spirals Tank comes with an easy-to-use RBA (rebuildable atomizer) core. This has a flavour enhancing Clapton coil already connected. To experience your first DIY Spiral build, you just need to add a length of cotton wick (not supplied) and prime with your favourite e juice. As well as giving you a deliciously flavoursome vape, DIY building on the RBA deck is cheaper than buying replacement coils.
SMOK’s amazing Spirals atomizer isn’t all about taste and technicalities – this on-trend tank comes in a brilliant range of colours, including Golden, Silver, Red, Blue, Green, or a multi-shade 7-Colour option – please not ehowever a choice of colour is NOT available we will supply from our supply as available.
Note: E juice is not supplied with the Spirals tank.
Contents:
SMOK Spirals Tank Features:
£3.00
Out of stock
Only logged in customers who have purchased this product may leave a review.
VaporLinQ 3 pack of replacement Galaxy coils BVC 1.30HM Coils screw in replacement coils. For use in the VaporLinQ Galaxy Tank only.
This version of the Innokin Prism Coil has been designed to fit the Endura T22 and Endura T18 vape tanks only. There is another model available to fit the T22E and T18E Tanks. Registering at 1.5 Ohm resistance the Prism Coil is designed for mouth to lung vaping, making it a good option for new users or advanced users looking for a discreet vape.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
Contains:
Vaporesso EUC Ceramic Coils are for use with the Veco Vape Tank and Estoc Vape Tank. EUC Ceramic Coils are available in 0.5 Ohm and 0.6 Ohm. With ceramic wicks rather than the traditional cotton, they are similar in design to the Vaporesso CCELL Coils.
Features:
These coils are smaller than others, this is through design and they help reduce waste – while still conducting heat and absorbing eliquid efficiently, the ceramic wick also increases the lifespan of your coils. For best results, tthese coils should be paired with high VG e-liquids that are 60% VG or higher.
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
The Aspire Athos Coils are for use with Aspire’s Athos tank; also part of the Speeder Kit. The A3 features a triple coil design, and is rated at 0.3Ω, for use between 50 – 70W. The A5 is rated at a lower 0.16Ω, and Aspire recommend a wattage range of between 100 – 120W for this coil. The Athos coils are sold individually, in single packs.
Contains:
1 x Aspire Athos Replacement Coil
Features:
Kanthal
Suittains:able for high wattages
Important information about Sub Ohm Vaping:
These coils are designed for sub-ohm vaping. They require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. The coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.
Please be aware that from time to time we may need to send out alternative branded liquids if stocks are low BUT they will always be the same great liquid that you expect, just in an alternative branded packaging
Reviews
There are no reviews yet.