The Smok TFV8 X-Baby replacement coils are designed for use with the Smok TFV8 X Baby vape tank. Due to the coil resistance, these perform best with high VG eliquids of 60% and above.
Features:
Featuring a Stainless Steel build, allowing for a longer lifespan as well as being compatible with Temperature Control and Variable Wattage mode. These coils are recommended to be powered between 40-80 watts.
These 0.4 Ohm dual coils are designed slightly differently to the coils in the Baby and Big Baby range, the X-Baby coils are unfortunately not cross-compatible with the other tanks and can only be used in the X-Baby.
Contains:
Important information about Sub Ohm Vaping:
These coils are designed for sub-ohm vaping. They require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. The coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.
We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.
Only logged in customers who have purchased this product may leave a review.
VaporLinQ 3 pack of replacement Galaxy coils BVC 1.30HM Coils screw in replacement coils. For use in the VaporLinQ Galaxy Tank only.
The Smok V8 Baby Q2 replacement coils have been designed for use with the Smok TFV8 Baby tank and Baby Beast tank. Producing larger amounts of vapour, these coils should be paired with a high VG e-liquid that is 60% VG or higher.
Features:
The V8 Baby Q2 features a dual coil build, which will deliver clear flavour and large clouds. The 0.4 Ohm resistance means the V8 Baby Q2 Smok coil is best used between 55 and 65 Watts. Thanks to it’s higher resistance, the Q2 is suited to a much wider range of mods than the lower resistance coils in the rest of the Baby Beast Family.
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit./p>
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
This version of the Innokin Prism Coil has been designed to fit the Endura T22 and Endura T18 vape tanks only. There is another model available to fit the T22E and T18E Tanks. Registering at 1.5 Ohm resistance the Prism Coil is designed for mouth to lung vaping, making it a good option for new users or advanced users looking for a discreet vape.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
Contains:
Vaporesso EUC Ceramic Coils are for use with the Veco Vape Tank and Estoc Vape Tank. EUC Ceramic Coils are available in 0.5 Ohm and 0.6 Ohm. With ceramic wicks rather than the traditional cotton, they are similar in design to the Vaporesso CCELL Coils.
Features:
These coils are smaller than others, this is through design and they help reduce waste – while still conducting heat and absorbing eliquid efficiently, the ceramic wick also increases the lifespan of your coils. For best results, tthese coils should be paired with high VG e-liquids that are 60% VG or higher.
Contains:
Important information about Sub Ohm Vaping:
Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.
With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.
Please be aware that from time to time we may need to send out alternative branded liquids if stocks are low BUT they will always be the same great liquid that you expect, just in an alternative branded packaging
Reviews
There are no reviews yet.